Panasonic DMC-FX150 - page 108

VQT1S88

108

Others

[MEMORY CARD ERROR

FORMAT THIS CARD?]

•This card has a format which is not recognized by the camera.

>Format the card again with the camera after saving necessary data on a PC etc. (P24)

[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]

•This message appears when the camera is not operating properly.

>Turn the camera off and on. If the message persists, contact the dealer or your nearest

Service Center.

[MEMORY CARD PARAMETER ERROR]

>Use a card compatible with this unit. (P15)

•You can only use an SDHC Memory Card if using cards with 4 GB or more capacity.

[MEMORY CARD ERROR

PLEASE CHECK THE CARD]

•An error has occurred accessing the card.

>Insert the card again.

>Insert a different card.

[READ ERROR/WRITE ERROR

PLEASE CHECK THE CARD]

•It has failed to read or write data.

>Remove the card after turning the power [OFF]. Insert the card again, turn the power on,

and try to read or write the data again.

•The card may be broken.

>Insert a different card.

[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE

WRITING SPEED OF THE CARD]

•When you set the picture quality to [ ], [ ] or [ ], we recommend using a high-speed

card with “10MB/s” or greater displayed on the package.

•Depending on the type of SD Memory Card or SDHC Memory Card, motion picture record ing

may stop in the middle.

[A FOLDER CANNOT BE CREATED]

•A folder cannot be created because there are no remaining folder numbers that can be used.

(P94)

>Format the card after saving necessary data on a PC etc. (P24) If you execute

[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.

(P22)

[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]

•The AV cable is connected to the camera.

>Press [MENU/SET] if you want to delete this message at once.

>Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect. (P23)

•This message also appears when the USB connection cable is connected to the camera only.

In this case, connect the other end of the USB connection cable to a PC or a printer. (P93, 95)

[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]

•The printer cannot print.

>Check the printer.

DMCFX150-VQT1S88_mst.book 108 ページ２００８年７月９日　水曜日　午後８時１８分

Contents

Main Operating Instructions Information for Your Safety WARNING: Model No. Serial No. Page Page Page Contents Before Use Preparation Basic Advanced (Recording pictures) Advanced (Playback) Connecting to other equipment Others Quick Guide Charge the battery. (P12) Insert the battery and the card. (P14) Turn the camera on to take pictures. Play back the pictures. Standard Accessories DE-A41B VYQ3509 CGA-S005A VFC4320 Names of the Components 123 104 9 5786 Page Charging the Battery Detach the battery after charging is completed. About the Battery Inserting and Removing the Card (optional)/the Battery About the Built-in Memory/the Card Setting Date/Time (Clock Set) Press [MENU/SET] to set. : : Setting the Menu Changing the clock setting Page Page About the Setup Menu [ON] [OFF] Page Page Page Selecting the [REC] Mode Slide the [REC]/[PLAYBACK] selector switch to [!]. Switching the mode by rotating the mode dial. P Taking pictures using the automatic function (: Intelligent Auto Mode) Slide the [REC]/[PLAYBACK] selector switch to [!]. Set the mode dial to []. Press the shutter button halfway to focus. Press the shutter button fully (push it in further), and take the picture. Bring the subject to the AF tracking frame, and press 4 to lock the subject. Scene detection AF Tracking Function About the flash Settings in Intelligent auto mode Taking pictures with your favorite settings (: Program AE mode) Slide the [REC]/[PLAYBACK] selector switch to [!]. Set the mode dial to []. Aim the AF area at the point you want to focus on. Press the shutter button halfway to focus. 1 2 Preventing jitter (camera shake) Direction detection function [REC] mode: n Taking Pictures with the Zoom Types of zooms Using the Optical Zoom/Using the Extended Optical Zoom (EZ)/Using the Digital Zoom To make subjects appear closer use (Tele) Rotate the zoom lever towards Tele. Using the Easy zoom Press [E.ZOOM]. Press [E.ZOOM] at Tele (the maximum zoom position). Playing back Pictures Rotate the zoom lever towards [L] (W). 1 2 Slide the [REC]/[PLAYBACK] selector switch A to [(]. Using the Playback Zoom Rotate the zoom lever towards [Z] (T). Switching the [PLAYBACK] mode 1 2 3 Deleting Pictures About the LCD Monitor Press [DISPLAY] to change. Page [REC] mode: Taking Pictures using the Built-in Flash Set the flash to match the recording. Press 1 []. Press 3/4 to select a mode. Available flash settings by recording mode *9 + 05 , 4 -6 .8 / 7 1 2 3 n : 1 2 Adjust the flash output Taking Close-up Pictures Press 4 [#]. Take the pictures. Taking Pictures with the Self-timer Press 2 []. Press 3/4 to select a mode. Press the shutter button halfway to focus and then press it fully to take the picture. Compensating the Exposure Press 3 [] until [EXPOSURE] appears, compensate the exposure with 2/1. Taking Pictures using Auto Bracket/ Color Bracket Auto Bracket Press 3 [] until [AUTO BRACKET] appears, set the compensation range of the exposure with 2/1. Press 3 [] until [AUTO BRACKET] appears, press [DISPLAY]. Press 2/1 to select the mode. Color Bracket Taking Pictures with Exposure Set Manually (: Manual exposure) Taking pictures that match the scene being recorded Press [MENU/SET] to set. 1 * [TRANSFORM] + 0 , - . / 1 3 2 1 2 3 4 : [BABY1]/ ; 1 2 3 9 1 5 1 [FLASH BURST] 4 6 8 7 [PIN HOLE] [FILM GRAIN] Motion Picture Mode Press [MENU/SET] to close the menu. Useful Functions at Travel Destinations Press 4 to select [LOCATION] and then press 1. Press 4 to select [SET] and then press [MENU/ Enter the location. Press [MENU/SET] twice to close the menu. Take a picture. Page Using the [REC] Mode Menu @ [PICTURE SIZE] A [QUALITY] ? [ASPECT RATIO] [INTELLIGENT ISO] > [SENSITIVITY] 1 2 [ISO LIMIT SET] = [WHITE BALANCE] 1 2 1 2 C [METERING MODE] [AF MODE] 1 2 1 2 1 [QUICK AF] [BURST] 1 2 3 [I.EXPOSURE] [MULTI EXPO.] 4 5 ) [DIGITALZOOM] H [COLOR EFFECT] I [PICT.ADJ.] [STABILIZER] [MIN. SHTR SPEED] B [AUDIO REC.] F [AF ASSIST LAMP] U [CLOCK SET] Playing Back Pictures in Sequence Press 3 to select [START] and then press [MENU/ Press 4 to finish the slide show. [PLAYBACK] mode: Selecting Pictures and Playing them Back ([CATEGORY PLAY]/[FAVORITE PLAY]) , * Playing Back Motion Pictures/Pictures with Audio Motion pictures [FAVORITE PLAY] Creating still pictures from a motion picture Press 3 to pause motion picture playback. Press [MENU/SET] to display the 9 screens playback screen. Press the shutter button. Press 3 to select [YES] and then press Using the [PLAYBACK] mode menu [CALENDAR] Select [CALENDAR] on the [PLAYBACK] mode menu. (P18) Press 3/4/2/1 to select the date to be played back. CAL Press [MENU/SET] to display the pictures that were recorded on the selected date. Press 3/4/2/1 to select a picture and then press [MENU/SET]. [TITLE EDIT] Select the picture, and then press [MENU/SET] to set. Press 3/4/2/1 to select text and then press [MENU/SET] to register. 1In step 4 when [SINGLE] (P82) is selected, delete all the texts, select [EXIT], and 2 1In step 4, delete all the texts, select [EXIT], and press [MENU/SET]. 2 Page Press 3 to select [YES] and then press [MENU/ Press [] to return to the menu screen. Select [RESIZE] on the [PLAYBACK] mode menu. (P18) Q [RESIZE] Reducing the picture size (number of pixels) Press 3/4 to select [SINGLE] or [MULTI] and then Page Page Page Page 1 Select [CANCEL] on the screen shown in step 2 2 Select [DPOF PRINT] on the [PLAYBACK] mode menu. (P18) Press 2/1 to select the picture and then press 4. O [DPOF PRINT] Press 3/4 to select [SINGLE] or [MULTI] and then Page 1 Select [CANCEL] on the screen shown in step 2 2 Select [AUDIO DUB.] on the [PLAYBACK] mode menu. (P18) Select the picture, and then press B [AUDIO DUB.] Press 2/1 to select the picture and then press [MENU/SET] to start audio recording. Press [MENU/SET] to stop recording. Select [COPY] on the [PLAYBACK] mode menu. (P18) Press 3/4 to select the copy destination and then S [COPY] Connecting to a PC Connect the camera to a PC via the USB connection cable A (supplied). Press 3/4 to select [PC], and then press [MENU/ Double-click on [Removable Disk] in [My Computer]. Printing the Pictures Connect the camera to a printer via the USB connection cable A (supplied). Press 3/4 to select [PictBridge(PTP)], and then Selecting a single picture and printing it Press 2/1 to select the picture and then press Press 3 to select [PRINT START] and then press Press 3 to select [PRINT START] and then press Print Settings Page Playing Back Pictures on a TV Screen Playing back pictures using the AV cable (supplied) Playing back pictures on a TV with an SD Memory Card slot Playing back on the TV with component socket Page Screen Display R8 AF TRACKING 1X Page Cautions for Use Page Page Message Display Page Functions that cannot be set or will not work under some conditions Page Page Troubleshooting Battery and power source Recording Page Lens LCD monitor Flash Playback TV, PC and printer Others Page Number of Recordable Pictures and Available Recording Time Number of recordable pictures Page Page Available recording time (when recording motion pictures) Note Specifications Page Page Digital Camera Accessory System Accessory# Description Figure Digital Camera Accessory Order Form (For USA Customers) Request for Service Notice Request for Service Notice: (USA Only) Limited Warranty Panasonic Digital Still Camera Limited Warranty Page Customer Services Directory Product Repairs MAIL TO : Centralized Factory Service Center Service in Puerto Rico Accessory Purchases Prcautions prendre AVERTISSEMENT : Page Index A B C D N O P Q R P VQT1S88