VQT1S88
40
Advanced (Recording pictures)
•In [HIGH SENS.] (P52) in scene mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m (3.77 feet) to approx. 15.1 m (49.5 feet)
Tele: Approx. 90 cm (2.95 feet) to approx. 7.5m (24.6 feet)
•In [FLASH BURST] (P53) in scene mode, the ISO sensitivity automatically switches to between
[ISO100] and [ISO3200] and the available flash range also differs.
Wide: Approx. 60cm (1.97 feet) to approx. 4.0 m (13.1 feet)
Tele: Approx. 30 cm (0.99 feet) to approx. 2.0m (6.57 feet)
¢When the [ISO LIMIT SET] is set to [AUTO].
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
1Press 3 [È] several times to display [FLASH], and then
press 2/1 to set the flash output.
•You can adjust from [j2E V] to [i2 EV] in steps of [1/3EV].
•Select [0 EV] to return to the original flash output.
2Press [MENU/SET] to close the menu.
•You can also close the menu by pressing the shutter button
halfway.
Note
•When the flash output is adjusted, the flash output value appears on the upper left of the
screen.
•The flash output setting is memorized even if the camera is turned off.
•The flash output adjustment cannot be used while in [FLASH BURST] in sc ene mode.
∫Shutter speed for each flash setting
¢1 It may vary depending on the [MIN. SHTR SPEED] setting (P73).
¢2 When Intelligent ISO is set (P63)
¢3 [SPORTS], [BABY1]/[BABY2] and [PET] in scene mode (P47)
•¢2, 3: The shutter speed becomes a maximum of 1 second in the following cases.
–When the optical image stabilizer is set to [OFF].
–When the camera has determined that there is little jitter when the optical image stabilizer is
set to [MODE1], [MODE2] or [AUTO].
•In Intelligent auto mode, shutter speed changes depending on the identified scene.
•There will be differences in the above shutter speeds in the scene modes.
–[NIGHT PORTRAIT]/[NIGHTSCENERY]: 8 or 1/8th of a second to 1/2000th of a second¢4
–[CANDLE LIGHT]: 1 or 1/8th of a second to 1/2000th of a second¢4
–[FLASH BURST]: 1/30th of a second to 1/2000th of a second
–[STARRYSKY]: 15 seconds, 30seconds, 60 seconds
–[FIREWORKS]: 1/4th of a second, 2 seconds¢4
–All other scene modes: 1/8th of a second to 1/2000th of a second
¢4 The maximum shutter speed is selected when the amount of jitter is minimal whil e
[STABILIZER] is set or when [STABILIZER] is set to [OFF].
Adjust the flash output
Flash setting Shutter speed (Sec.) Flash setting Shutter speed (Sec.)
‡
1/30¢1 to 1/2000th
1¢1 to 1/2000th
1 or 1/4th to 1/2000th¢2
‰Œ 1¢1 to 1/2000th
1 or 1/4th to 1/2000th¢2, 3
DMCFX150-VQT1S88_mst.book 40 ページ ２００８年７月９日　水曜日　午後８時１８分