VQT1S88
90
Advanced (Playback)
Press 3/4 to set the number of prints, and then press [MENU/SET]
to set.
•When [MULTI] has been selected, repeat steps 3 and 4 for each picture. (It is not
possible to use the same setting for a multiple number of pictures.)
Press [‚] to return to the menu screen.
•Press [MENU/SET] to close the menu.
∫Canceling all the [DPOF PRINT] settings
1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2Press 3 to select [YES] and then press [MENU/SET].
3Press [MENU/SET] to close the menu.
•You cannot select [CANCEL] if not even one picture has been set for DPOF printing.
∫To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
•When you go to a photo printing store for digital printing, be sure to order the printing of the
date additionally if required.
•Depending on the photo printing store or the printer, the date may not be printed even if you s et
to print the date. For further information, ask at your photo printing store or refer to the
operating instructions for the printer.
•The date cannot be printed on pictures stamped with text.
Note
•The number of prints can be set from 0 to 999.
•With a printer supporting PictBridge, the date print settings of the printer may take preceden ce
so check if this is the case.
•It may not be possible to use the DPOF print settings with other equi pment. In this case, cancel
all the settings, and reset the settings.
•If the file is not based on the DCF standard, the DPOF print setting cannot be set.
You can set protection for pictures you do not want to be deleted by mistake.
Select [PROTECT] on the [PLAYBACK] mode menu. (P18)
P [PROTECT]
Press 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
4
5
1
2
DMCFX150-VQT1S88_mst.book 90 ページ ２００８年７月９日 水曜日 午後８時１８分