VQT1S88
96
Connecting to other equipment
Note
•Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP;
optional).
•Before inserting or removing a card, turn the camera off, and disconnect the USB connection
cable.
•You cannot switch between the built-in memory and the card while the ca mera is connected to
the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect
the USB connection cable to the printer again.
¢Only when [FAVORITE] is at [ON] and when there are pictures set as favorites. (P88)
Selecting a single picture and printing itPress 2/1 to select the picture and then press [MENU/SET].
•The message disappears in about 2 seconds.
Press 3 to select [PRINT START] and then press [MENU/SET].
•Refer to P97 for the items which can be set before starting to print
the pictures.
•Press [MENU/SET] to cancel printing halfway.
•Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing themPress 3.Press 3/4 to select an item and then press [MENU/SET].
•If the print check screen has appeared, select [YES], and print
the pictures.
Item Description of settings
[MULTISELECT]
Multiple pictures are printed at one time.
•Press 3/4/2/1 to select the pictures, and then When [DISPLAY] is
pressed, [é] appears on the pictures to be printed. (When [DISPLA Y] is
pressed again, the setting is canceled.)
•After the pictures have been selected, press [MENU/SET].
[SELECTALL] Prints all the stored pictures.
[DPOF PICTURE] Prints the pictures set in [DPOFPRINT] only. (P89)
[FAVORITE]¢Prints the pictures set as favorites only. (P88)
1
2
1
2
DMCFX150-VQT1S88_mst.book 96 ページ 2008年7月9日 水曜日 午後8時18分