VQT1R87
102
Others
[MEMORY CARD ERROR
FORMAT THIS CARD?]
•This card has a format which is no t recognized by the camera.
>Format the card again with the camera after saving necessary dat a on a PC etc. (P23)
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN]/[SYSTEM ERROR]
•This message appears when th e ca mera is not operating proper l y.
>Turn the camera off and on. If the messag e per sists, contact the dealer or your near est
Service Center.
[MEMORY CARD PARAMETER ERROR]
>Use a card compatible with this unit. (P15)
•You can only use an SDHC Memory Card i f us i n g cards with 4GB or more capacity.
[MEMORY CARD ERROR
PLEASE CHECK THE CARD]
•An error has occurred accessing the car d.
>Insert the card again.
>Insert a different card.
[READ ERROR/WRITE ERROR
PLEASE CHECK THE CARD]
•It has failed to read or write data.
>Remove the card after turning the power [OFF]. Insert the card again, turn the power on,
and try to read or write the data again.
•The card may be br oken.
>Insert a different card.
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
•When you set the p icture quality to [ ], [ ] or [ ], we recommend us ing a high-speed
card with “10MB/s” or greater displayed on the package.
•Depending on the type of SD Memor y Card or SDHC Memory Card, motio n picture recording
may stop in the middle.
[A FOLDER CANNOT BE CREATED]
•A folder cannot be created because the re are no remaining folder numbers that c an be used.
(P89)
>Format the card after saving nec essary data on a PC etc. (P23) If y ou e xecute
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
(P22)
[PICTURE IS DISPLAYED FOR 4:3 TV]/[PICTURE IS DISPLAYED FOR 16:9 TV]
•The AV cable is connecte d to the camera.
>Press [MENU/SET] if you want to delete this message at once.
>Select [TVASPECT] in the [SETUP] menu if you want to change the TV aspect. (P22)
•This message also appears whe n the USB connection cable is co nne cted to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer. (P88, 90)
[PRINTER BUSY]/[PLEASE CHECK THE PRINTER]
•The printer cannot print.
>Check the printe r.
VQT1R87.book 102 ページ 2008年6月26日 木曜日 午前9時35分