105
VQT1R87
Others
Functions that cannot b e used when the componen t cable is connected
[LCD MODE]/[HISTOGRAM ]/[TITLE EDIT]/[TEXT STAMP]/[RESIZE]/ [TRIMMING]/
[LEVELING]/[ASPECT CONV.]/[AUDIO DUB.]/[COPY]/[MULTI] settings of [DPOF PRINT]/
[MULTI] settings of [PROTECT]/[D ELETE MULTI]/Creation of s till pictures from mo tion
pictures
Troubleshooting
First, try out the following procedures (P105–111).
The battery is not inserted c orr ectly. (P14)
The battery is exhausted.
Is [AUTO LCD OF F ] (P21) of the [E C ONOMY] mode a c tive?
>Press the shutter button half way to cancel these modes.
The battery is exhausted.
The battery is exhausted.
If you leave the camera on, the battery will be exhausted.
>Turn the camera off frequently by using the [ECONOMY] mode et c. (P21 )
Is the temperature of the battery excessively high or low? If it is, it will take longer than usual to
charge the battery or chargi ng may remain incomplete.
Are the terminals of the charg er or battery dirty?
>Wipe off the dirt using a dry cloth.
Is the [REC]/[PLAYBACK] selector switch at the [!] setting? (P24)
Is the mode dial correctly set?
Is there any memory remaining on the built-in memory or the card?
>Delete the pictures which ar e not necessary to increase the a vailable memory. (P33)
[ROTATE] (P83) Motion pictures
Protected pic tures
[ROTATEDISP.] (P83) Multi playback
[CALENDAR]
PRINT WITH DATE Pictures stamped with [TEXT STAMP]
[AUDIO DUB.] (P86) Motion pictures
Protected pic tures
If the problem is not resolved, it may be improved by selecting [RESET]
(P22)
on the
[SETUP] menu when taking p ictures.

Battery and power source

The camera cannot be ope rated even when it is turn ed on.
The LCD monitor turns off while the camera is tu rned on.
The camera turns of f immediately after it is turned on.
The [CHARGE] lamp flashes.

Recording

The picture cannot be re corded.
VQT1R87.book 105 ページ 2008年6月23日 月曜日 午前11時17分