VQT1R87
16
Preparation
Note
•Do not turn this unit off, remo ve its battery or card or disconnect the AC adaptor
(DMW-AC5PP; optional) when the access indication is lit [whe n pictures are being read
or deleted or the built-in memory or the card is being formatted (P23)]. Furthermore, do
not subject the camera to vibration or impact. The card or the data on the card may be
damaged, and this unit may no longer operate normally.
•The data on the built-in memory or t he card may be damaged or lost due to el ec tromagnetic
waves, static electricity or bre akdown of the camera or the card . We recommend storing
important data on a PC etc.
•Do not format the card on your PC or other equipment. Format it on the camera onl y to ensure
proper operat i on. (P23)
•Keep the Memory Card out of re ach of children to prevent swallowi ng .
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Press [MENU/SET].

Press 2/1 to select the items (year , mont h,

day, hour, minute, display seque nce or time

display format), and press 3/4 to set.

A: Time at the home area
B: Time at the travel destination (P56)
‚: Cancel without setting the clock.
•Select either [ 24HRS] or [AM/P M] for the time display
format.
•AM/PM is displayed when [AM/PM] is selected.

Press [MENU/SET] to set.

•After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to recording mode, and check that the display reflects the settings that were
performed.
•When [MENU/SET] has bee n pressed to complete the settings without the clock having
been set, set the clock correc tly by following the “Chang ing the clock setti ng” procedure
below.
Turn the camera on.
•The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]
mode.)
A[MENU/SET] bu tton
BCursor buttons
1
ONOFF
/SET
MENU
2

:

:

3
4
VQT1R87.book 16 ページ ２００８年６月２３日　月曜日　午前１１時１７分