39
VQT1R87
Advanced (Recording pictures)
•In [HIGHSENS.] (P48) in scene mode, the ISO sensitivity automatically switches to between [ISO1600]
and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m (3.77 feet) to approx. 15.4 m (50.5 feet)
Tele: Approx. 1.0 m (3.28 feet) to approx. 7.3 m (24.0 feet)
•In [FLASH BURST] (P49) in scene mode, the ISO sensitivity autom atically switches to between
[ISO100] and [ISO3200] and t he av ailable flash range also differs.
Wide: Approx. 60 cm (1.97 feet) to approx. 4.0 m (13.1 feet)
Tele: Approx. 1.0 m (3.28 feet) to approx. 1.9 m (6.23feet)
∫Shutter speed for each flash setting
¢1 It may vary depending on the [MIN. SHTR S P EED] setting (P65).
¢2 When Intelligent ISO is set (P59)
¢3 [SPORTS], [BABY1]/[BABY2] and [PET] in scene mode (P44)
•¢2, 3: The shutter sp eed becomes a maxim um of 1 secon d i n the following cas es.
–When the optical im age stabilizer is set to [OFF].
–When the camera has determined that there is little jitter when the optical image stabilizer is
set to [MODE1], [MODE2] or [AUTO].
•In Intelligent auto mode, shutter speed changes depending on the identified scene.
•There will be differences in the above shutter speeds in the scene modes.
–[NIGHT PORTRAIT]/[NIGHT SCENERY]: 8 or 1/8t h of a sec on d to 1/2000th of a second¢4
–[CANDLE LIGHT]: 1 or 1/8th of a second to 1/2 000th of a second¢4
–[FLASH BURST]: 1/30th of a second to 1/2000 th of a second
–[STARRYSKY]: 15 seconds, 30seconds, 60 seconds
–[FIREWORKS]: 1/4th of a seco nd, 2seconds ¢4
–All other scene mo des: 1/8th of a second to 1 /2000th of a second
¢4 The maximum shutter speed is select ed w hen the amount of jitter is minimal while
[STABILIZER] is set or when [STABILIZER] is set to [OFF].
Note
•If you bring the flash too close to an ob ject, the object may be distorted or discolored by t he
heat or lighting from the flas h.
•When you take a picture beyond the available flash range, the exposure may not be adj us ted
properly and the picture may bec ome bright or dark.
•When the flash is being charg ed, th e flash icon blinks red, and you cannot take a picture ev en
when you press the shutter bu tton fully.
•The white balance may not be pro perly adjusted if the flash level is insufficie nt for the subject.
•When the shutter speed is fa st , the flash effect may not be sufficient.
•It may take time to charge the flash if you repeat taking a picture. Take a picture after the
access indication disapp ear s.
•The red-eye reduction effect di ff er s between people. Also, if the subject was far aw ay from the
camera or was not looking at t he f i rs t flash, the effect may not be evident.
Flash setting Shutter speed (S ec . ) Flash setting Shutter speed (Sec.)
‡
1/30¢1 to 1/2000th
1¢1 to 1/2000th
1 or 1/4th to 1/20 00th¢2
‰Œ 1¢1 to 1/2000th
1 or 1/4th to 1/2000th¢2, 3
VQT1R87.book 39 ページ ２００８年６月２８日 土曜日 午後４時８分