Preparation
17
VQT0Y19
Setting Date/Time
(Clock Set)
wInitial setting
The clock is not set so the following screen
appears when you turn the camera on.
: [MENU/SET] button
1Press [MENU/SET].
2Move
to select the
date and time.
: Time at the home area
: Time at the travel destination (P59)
•/: S elect the desired item.
•/: Set the display order for the date
and time.
•Press [ ] to cancel the clock setting
without storing the date and time.
•Refer to [WORLD TIME] (P59) for
information about setting the local time
at the travel destination area.
3Press [MENU/SET] several times
to close the menu.
•Turn the camera off after finishing
setting the clock. Then turn it on and
check that the clock setting is correct.
wChanging the clock setting
1Press [MENU/SET].
2Move / to select [CLOCK SET].
(P70)
3Move and then perform steps 2and3
to set the clock.
•You can also set the clock in the
[SETUP] menu. (P18)
•When a fully charged b attery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed.
•You can set the year from 2000 to 2099.
The 24-hour system is used.
•If the date is not set in the camera it will
not be printed when you use a photo
printing service, even if the store provides
a date printing option for your
photographs. (P86)
OFF ON
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
112006
..
0000
:
CLOCKSET
SELECT SET EXIT
MENU
:
:
CANCEL
3
/
3
REC
EXIT
MENU
SELECT
PICT.ADJ.
OFF
STANDARD
COL.EFFECT
CLOCK SET