Advanced
56
VQT0Y19
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P49)
This mode allows you to take pictures of a
baby with a healthy complexion. When the
flash is used, the light from it is weaker than
usual.
You can set the birthdays of two babies by
using [BABY1] and [BABY2].
•The baby’s age can be displayed when
playing back pictures.
•The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] in the CD-ROM (supplied).
(For information about printing, refer to the
separate operating instructions for PC
connection.)
wAge display setting
•If you want the age to be displayed, set
the birthday in advance, select
[WITH AGE] and press [MENU/SET].
•If you do not want the age to be displayed,
select [WITHOUTAGE] and press
[MENU/SET].
wBirthday setting
1Move / to select [BIRTHDAY SET.]
and then press [MENU/SET].
2When the message [PLEASE SET THE
BIRTHDAY OF THE BABY] appears,
select items (Year/Month/Day) using
/ and set them using /.
3Press [MENU/SET] to finish the setting.
•If you select [WITH AGE] without setting
the birthday in advance, a message is
displayed. Press [MENU/SET] and set the
birthday in steps 2 and 3.
•The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
30 cm (0.98 feet) (Tele) to c]
•ISO sensitivity is fixed to [ ].
•After tur ning on the camera in [BABY1]/
[BABY2] in scene mode or switching to
[BABY1]/[BABY2] from other scene
modes, the age and current date and time
are displayed for about 5seconds at the
bottom of the screen.
•The age display style differs depending on
the language setting in the recording
mode.
•The display style when print ing may differ
slightly from the display style on the
screen.
•The date of birth is displayed as
[0 month 0 day].
•If the age is not pr operly displayed, check
the clock and birthday settings.
•If the camera is set to [WITHOUT AGE],
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even if camera is set
to [WITH AGE] after taking the pictures.
•Use [RESET] in the [SETUP] menu to
reset the birthday setting. (P21)
[BABY1]/
[BABY2]
1
2
/SET
MENU
BABY1
WITHOUT AGE
BIRTHDAY SET.
WITH AGE
SELECT SET
MENU
CANCEL
1
10:00 DEC.1.2006
9
months
10
days
3
1