Connecting to other equipment
98
VQT0Y19
•[PAGELAYOUT]
(Layouts for printing that can be set with
this unit)
•An item cannot be selected if the printer
does not support the page layout.
wSetting the date printing with the
DPOF print in advance
We recommend setting DPOF date printing
with [DPOF PRINT] (P86) in advance when
the printer supports it. If you select
[DPOF PICTURE], printing starts and the
recording date is printed.
wLayout printing
•When printi ng a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set
[PAGELAYOUT] to [ ] and then set
[NUM. OF PRINTS] to 4.
•When printing different pictures on
1 sheet of paper (only in DPOF
printing)
For example, if you want to print 4 different
pictures on 1 sheet of paper, set
[PAGELAYOUT] to [ ] and then set
[COUNT] in [DPOF PRINT] (P85) to 1 for
each of the 4 pictures.
•Do not disconnect t he USB connection
cable when the cable disconnection
warning icon [ ] is displayed.
(Depending on the printer, the icon may
not be displayed.)
•If the remaining batter y power becomes
low while the camera and the printer are
connected, the status indicator blinks and
the alarm beeps. If this happens during
printing, press [MENU/SET] and stop
printing at once. If not printing, disconnect
the USB connection cable.
•The camera is receiving an error message
from the printer when the [q] indication
lights orange during printing. After
finishing printing, make sure there are no
problems with the printer.
•If the total number o f DPOF prints or the
number of DPOF pictures printed is high,
pictures may be printed several times. The
remaining number of prints indicated may
differ from the number set. This is not a
malfunction.
•With date printing, the s etting on the
printer may take priority over the setting
on the camera. Check the date print
setting on the printer also.
•The message [USB MODE CHANGED.
PLEASE REMOVE THE USB CABLE.]
appears if you change the mode dial to a
mode other than [ ] while the camera
and the printer are connected. Set the
mode dial to [ ] again and then
disconnect the USB connection cable. If
this happens during printing, stop printing
and then disconnect the USB connection
cable.
Settings on the printer are
prioritized.
1 picture with no frame on 1 page
1 picture with a frame on 1 page
2 pictures on 1 page
4 pictures on 1 page