289
Others
•There may be defective pixels in the image sensor. Perform [Pixel Refresh] (P52).
•Set the AF area to the distinctive color of the subject if there is a part that is different from the
surrounding color. (P144)
•Is your finger covering up the speaker? (P11)
•You may not be able to record for a short while after turning this unit on when using a large
capacity card.
•Use a card with SD Speed Class with “Class4” or more for [AVCHD]/[MP4] motion picture
recording, and use “Class10” for [MOV].
•Depending on the type of the card, recording may stop in the middle.
>If recording stops even by using a card of the above specified SD Speed Class, or if you are
using a card on which recording and deletion were repeated many times or a card
formatted on a PC or another device, the data writing speed is decreasing. We recommend
you make a backup, and then format (P52).
•When recording a motion picture, the screen may go dark after a certain period to reduce
battery consumption, but this will not affect the recorded motion picture.
•The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
Bright spot not in subject is recorded.
Subject cannot be locked. (AF tracking not possible)
Operation sound is small.
Motion pictures
Recording motion pictures is not possible.
Motion picture recording stops in the middle.
When recording a motion picture, the screen may go dark.
The screen may be blacked out momentarily, or the unit may record noise.