Making Copies

Basic Menu

■Copying the Same Size Originals (1:1)

Copy size is automatically selected.

1

2

or

100%

If set in other

If original size

function mode

is not detected

■Positioning Original(s)

On the i-ADF

On the Platen

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note 1) Once after setting originals , pressing Start button, do not press originals as it may cause original jam. Note 2) When originals with clipped or stapled, take off clips or staples, then set originals neat.

■Using the ADF

Originals that cannot be used

●Post Cards, Drawing Papers, Transparencies, Labelling Papers, Heavyweight Papers, Thin Art Papers, Film Thermal Papers

Inappropriate Originals

●Paper with a smooth surface such as glossy and coated papers

●Originals with a Lead Edge that is ripped, creased, folded, punched, or glued.

●Mixed width size Originals (except a combination of Ledger and Letter)

●Paste-ups

●Pressure sensitive or carbon backed papers

●Paper with excessive curl

●Stapled originals

●Freshly printed copies from a laser printer

●Originals with fresh White-Out (Liquid paper correction fluid)

ADF

Set the originals up to the

 

upper limit indicator/Guide.

 

Upper Limit

 

Indicator

 

Upper Limit Guide

 

ADF Tray

Original Guides

Adjust to the original’s width

NOTE

●During the copy operation and after making copies, the fan motor may start spinning. This is a normal operation and is used to cool down the copier.

34