Making Copies

Other Features

■Job Memory

Five Copy Jobs can be stored in Memory (M1 to M5) for recall at a later time.

Set up the copy job to be stored.

NOTE:

When the M5 Key is used, the Double Exposure Mode should be set to "Off" in the Copier Settings "19 Double Exposure". (See page 67)

To store a job in memory

1

2

M1, M2, M3, M4, M5

(See NOTE)

■Double Exposure

From 2-Sided originals to 1-Sided 2 in 1 copies (side-by-side image).∗1

Original Size:

 

Maximum Invoice

Copy Size: Letter-R

ex. Invoice

 

NOTE:

AA D

BB E

CC F

Front Side

Back Side

Image

Image

1

2

Original Guide

 

• Front Side of Original

∗2

•Original Size:

Free, maximum Invoice size

•Opening the ADF

•Fit original to the Original Guide.

5

6

Back Side

of Original

NOTE:

●When opening the ADF.

●An incorrect position detection of the original may occur when a strong light shines on the glass during this mode.

●An incorrect exposure may occur when there is a black line at the edge of the original or an image which the machine interprets as a black pattern in this mode.

●The final copy may be affected if colored background original(s) do not have a white edge or if it is less than 2 mm wide.

∗1 When selecting the Double Exposure, it will be displayed as "2 in 1" at Job Settings, and "N in 1" of Function Select Key will also be displayed.

∗2 Double Exposure function set by M5 key is unable to store with other Job Memory.

NOTE

●JOB MEMORY mode will not be deleted even if the power switches are turned Off.

●When storing a new job into a programmed memory location, the previously stored job will be overwritten and erased.

●M1, M2 can use as manual skyshot mode by setting the user function mode.

60