Panasonic DP-3530 manual 75

■Printer Settings

Screen		Modes	Function	Initial
No.				Setting
	00	Job Completion Time	Sets the job completion time setting.	180
			●1~ 999 sec.
	01	Page Protection	Compress automatically then printout.	Off
			●Off, On
01/03	02	Error Page Print	Sets the error page printout.	Off
			●Off, On
	03	Spool Function	Sets the spool function.	On
			●Off, On
	04 Text Print		Prints text page only.	On
			●Off, On
	05	PS Configuration Print	Prints the PS status page.	Start
			●Stop, Start
	06	Printer Settings Print	Prints the printer status.
			●Stop, Start
	07	Font List Print (PCL)	Prints the PCL font list.∗	Start
02/03			●Stop, Start
	08	Font List Print (PS)	Prints the PS font list.∗	Start
			●Stop, Start
	09	Mailbox Data Holding	Sets the automatic holding period of mailbox	7 days
			data.∗
			●Infinity, 1 day, 2 days, 3 days, 4 days, 6 days,
			7 days
	10	Delete Mailbox Data	Deletes the mailbox data.∗	Before
			●All, Before
	11 Print Queue Delete		Sets the delete authorization for the print queue.	Key op.
03/03			●Free, Key op. (operator)
	12 AppleTalk Zone Name		Inputs an AppleTalk Zone name.∗∗
			●Maximum 32 characters
	13	NetWare	Sets the NetWare Operating System.	On
			●Off, On (When using IPX/SPX protocol of
			Novell NetWare)

NOTE	●The Key Operator ID Code is required before any changes can be made to items on this
	page.

∗Functions No. 07 to 10 are available when the following options are installed. Function No. 07: Printer Controller Module (DA-PC602)

Function No. 08: Multi Page Description language Controller Module (DA-MC600)

Functions No. 09 and 10: Hard Disk Drive (DA-HD60)

∗∗When Function No. 12 is set, cycle the power by turning the Power Switch on the Left Side of the machine OFF and ON.

Function

75