Panasonic DP-3530 85

Select “Auto Registration”.

Set the PC and Key Name to be saved on the machine.

When the DP-3530/4530/6030 is installed on a different subnet mask∗ of the network (LAN), Select "Add Device" then, register the machine by following the steps below.

3Click OK.

Right-click on the Panasonic Communications Utility icon, and select one of the Scanner Reception Notifications (Pop up Display or Icon Display).

NOTE:

∗Consult your system administrator for detail of your subnet mask.

When the DP-3530/4530/6030 is installed on a different subnet mask∗ of the network.

	Input the machine's Device Name and IP Address.
	Click OK.
	Returns to the screen on the left.
Click "Add".	3 Click OK.
Click "Add".	Returns to the Scanner Configuration screen above.

Select a destination (PC)∗

∗A destination will be indicated “ROUTING MENU” : refer to optional Document Distribution System (DA-WR10).

NOTE:

If the Panasonic Communication Utility software is not started on your PC, a destination is not shown on the Touch Panel Display.

	When
	“DATE/TIME”	8
	is selected.	8
Select a file	When “CUSTOM” is selected.
format	When “CUSTOM” is selected.
format
9 PC Screen		10

	5
Select a Mode if required
Resolution∗	2-Sided Original
Exposure	Thin Original
	Thin Original

Original mode ∗150dpi: Text mode only.

File name

(Max. 20 characters) Ex.: Jack

Refer to PDMS Operating

Instructions on the

CD-ROM.

NetworkScanner

(Option)