Safety Information

Connecting the Cables

External Telephone Jack

You can connect an additional standard single line telephone to the machine. To connect the telephone, remove the protective tab on the TEL jack.

Telephone Line Jack

Plug one end of the telephone line cable into the "RJ-11C" telephone jack supplied by the telephone company, and the other end into the LINE jack on the left side of the machine. (Refer to the Dialing Method, see pages 175, and 190)

ACTIVITY Lamp

Blinks when there is data traffic on the LAN.

RX

LAN Connection Jack (10Base-T/100Base-TX)

RJ-11C Telephone Jack

LAN Cable (10Base-T/100Base-TX Cable) Insert the plug until a click is heard.

(LAN cable is not included with the product.) Purchase a Category 5 Cable, compliant with EIA/TIA 568-A-5 standard.

LINK

LINK Lamp

Illuminates when connected to the LAN.

Ethernet-Token-Ring

Bridge

(Optional Order

No. UE-204006)

Lamp will not turn ON if LAN cable is defective

(contains breaks).

Ethernet LAN (10Base-T/100Base-TX) Cable (Not included)

Power Switch

After connecting all cables, and the Power Cord, turn the Main Power Switch on the Back,

and the Power Switch on the Left Side of the machine to the ON position.

10Base-T/100Base-TX Ethernet Hub

12