Sending Documents via LAN

Multi Email Station Addressing (Broadcasting)

You can store the document(s) into memory, and then send to multiple stations (Up to 270 addresses) via LAN.

Make sure that the FAX/EMAIL lamp is ON. If not, press to select the "FAX/EMAIL" mode.

1

2

Set document(s).

You can temporarily change the transmission setting.

Enter email addresses by any combination of the following methods:

•Manual Email Addressing, press OK after each station is entered. (Up to 70 stations)

•Address Book Email Addressing. (Up to 200 stations)

Ex: PANASONIC

Memory Transmit STN(s):001

TO: PANASONICTIFF abc@panasonic.com

PANASONIC

QUALITY DEPT

3

The document(s) begin to store into memory with a file number.

Then starts connecting to the LAN immediately after storing the first page. (See Note 4)

While sending the document(s) via LAN, the remaining page(s) continue to store into memory.

NOTE

1.If your machine sounds an alarm (pi-pi-pi) in Step 2 above, this indicates that the Dialer is Full (more than 70 full email addresses are entered, or 70 transmission reservations including G3 communication have been already reserved).

2.If the transmission cannot be completed for any reason, the email may be returned undelivered; otherwise no reply will be printed.

3.The unit will accept a combination of email addresses, and PSTN dialing numbers.

4.The “QUICK MEMORY TRANSMISSION” is disable if multiple stations are set.

128