Basic Transmission Settings

Original (Text/Photo)

The Original setting is useful when sending photographs, or illustrations with gray tones. Your machine is preset to "TEXT". You can select either "TEXT/PHOTO", or "PHOTO" mode.

for text only originals

TEXT

for text and photo originals

TEXT/PHOTO

for photo or illustration originals

PHOTO

Others

2-SIDED

ORIGINAL

X-STAMP

COMPLETION

NOTICE

COMM. STATUS

GET EMAIL

FILE TYPE AND NAME

Sending 2-Sided Original(s)

2-Sided scanning selection control is available for the user depending on the original layout. The following selections are available for the 2-Sided scanning option:

•Long Edge : 2-Sided scanning aligned to the long edge of the original.

•Short Edge: 2-Sided scanning aligned to the short edge of the original.

Verification Stamp

•Confirms successful transmissions by stamping the bottom of each successfully transmitted page with a small mark.

You or a selected party can be notified with a Job Completion Notice via a pop up screen on your/their PC when the Copy Job, or the Print Job is completed. You must setup the Job Completion Notice feature prior to starting the job, and properly setup the Job Status Utility.

Confirms the commication status.

Retrieving the Email temporarily.

The File Format can be changed temporarily when sending an Internet Fax.

NOTE

1.When you select TEXT/PHOTO, or PHOTO, your machine will automatically select Fine Resolution.

2.When you store a document in memory, the Verification Stamp will stamp on the document if it is successfully stored in memory. In this case the Verification Stamp is not a confirmation that the document was successfully transmitted. If you wish to disable the use of the Verification Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See page 191)

3.To change the preset Verification, or File Format position, change the setting of Fax Parameter No. 04, or 177. (See pages 190, and 195)

20