Making Copies

Other Features

■ Job Memory

Five Copy Jobs can be stored in Memory

To store a job in memory

 

(M1 to M5) for recall at a later time.

1

2

 

Set up the copy job

 

 

to be stored.

 

 

NOTE:

 

 

When the M5 Key is used, the Double

 

 

Exposure Mode should be set to "Off" in the

 

M1, M2, M3, M4, M5

Copier Settings "16 Double Exposure". (See

 

 

 

page 75)

 

 

■Double Exposure

From 2-Sided originals to 1-Sided 2 in 1 copies (side-by-side image). ∗1

Original Size:

Ex: Invoice-R Copy Size: Letter-R

ABC

ABC

Front Side

Image

 

DEF

Back Side

 

 

 

 

Image

NOTE:

When opening the Platen Cover, or ADF

●An incorrect position detection of the original may occur when a strong light shines on the glass during this mode.

●An incorrect exposure may occur when there is a Black line at the edge of the original, or an image which the machine interprets as a Black Pattern in this mode.

●The final copy may be affected if colored background original(s) do not have a White edge, or if it is less than 2 mm wide.

∗1 When selecting the Double Exposure, it will be displayed as "2 in 1" at Job Settings, and "N in 1" of Function Select Key will also be displayed.

∗2 Double Exposure function set by M5 key is unable to store with other Job Memory.

12

Original Guide

∗2

 

•Front Side of Original

•Original Size:

Free, maximum Invoice size

•Opening the ADF

•Fit original to the Original Guide.

56

Back Side

of Original

NOTE

● JOB MEMORY mode will not be deleted even if the power switches are turned Off.

 

● When storing a new job into a programmed memory location, the previously stored job will be

 

overwritten and erased.

 

● M1, M2 can use as manual skyshot mode by setting the user function mode.

64