Consumables Replacing
Replacing the Battery
■Replacing the Battery
The copier has an internal battery (Product No.: CR2032) which maintains the date and time. In the event, the battery requires replacement, the following message will be displayed.
The service life of the battery is approximately 1 year under normal use.
!CAUTION
●THIS PRODUCT CONTAINS A LITHIUM BATTERY. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE. IMPROPER USE OR REPLACEMENT MAY CAUSE OVERHEATING, RUPTURE OR EXPLOSION RESULTING IN INJURY OR FIRE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS OF YOUR LOCAL WASTE OFFICIALS AND LOCAL REGULATIONS.
●Be sure to use the specified type of battery only.
●Ensure that the battery is installed with correct polarity.
!WARNING
●Keep the battery away from small children.
■Notice: California only:
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Open the Front Cover. | 3 | Reinstall the Holder and Screw. |
1 Remove the Screw and Holder. |
|
2
1 
2
64
NOTE
●Battery Holder is placed behind the print data LED.