[SXGA MODE]

Sets when the entire image is not displayed while SXGA is input.

Set it to [SXGA] normally.

1)Press ▲▼ to select [SXGA MODE].

2)Press ◀▶ to switch [SXGA MODE].

zzThe setting will change as follows each time you press the button.

[SXGA][SXGA+]

[SXGA]

When the entire image is

displayed by setting to [SXGA]

 

[SXGA+]

When the entire image is not

displayed by setting to [SXGA]

 

[WIDE MODE]

Sets when the image is projected with the aspect ratio of 4:3 even when the wide signal is input.

1)Press ▲▼ to select [WIDE MODE].

2)Press ◀▶ to switch [WIDE MODE].

zzThe setting will change as follows each time you press the button.

[ON][OFF]

[ON] When inputting the wide signal

[OFF] When inputting the 4:3 signal

[OPTION] menu

[NO SIGNAL SLEEP]

Sets the time to stop the output from the <DIGITAL LINK> terminal when the interface box detects that no signal is input to the selected video input terminal. With this function, the power consumption of the interface box and the projector can be reduced.

1)Press ▲▼ to select [NO SIGNAL

SLEEP].

2)Press ◀▶ to switch [NO SIGNAL

SLEEP].

zzThe setting will change as follows each time you press the button.

[10MIN.][20MIN.]

[OFF]

 

 

[30MIN.]

 

 

[10MIN.]

Stops output of the signal when

no signal is input for 10 minutes.

 

[20MIN.]

Stops output of the signal when

no signal is input for 20 minutes.

 

[30MIN.]

Stops output of the signal when

no signal is input for 30 minutes.

 

[OFF]

Disables [NO SIGNAL SLEEP].

Note

zzThis setting is supported only when the DIGITAL LINK compatible projector is connected.

zzTo transfer the user logo to the projector by using the logo transfer software, turn this function to [OFF] before transferring. When the output is stopped for longer than the set time, the communication will be shut down and there are cases that the user logo cannot be transferred properly.

zzWhen output from the <DIGITAL LINK> terminal stops, output from the <AUDIO OUT> terminal also stops.

ENGLISH - 37