Technical information
■■Communication conditions
Signal level | |
Sync. method | Asynchronous |
Baud rate | 9 600 bps |
Parity | None |
Character length | 8 bit |
Stop bit | 1 bit |
X parameter | None |
S parameter | None |
■■Cable specification
zzWhen connected to a computer
Interface box (<SERIAL IN> terminal)
1 | NC | NC | 1 | |
2 |
|
| 2 | |
|
| |||
3 |
|
| 3 | |
NC | NC | |||
4 | 4 | |||
5 |
|
| 5 | |
NC | NC | |||
6 | 6 | |||
7 |
|
| 7 | |
|
| |||
8 |
|
| 8 | |
NC | NC | |||
9 | 9 |
Computer
(DTE specifications)
■■Control commands
When controlling the projector from a computer, the following commands are available: [Projector control command]
Command | Control contents | Parameter | Remarks | |
|
| DL1:VID | VIDEO | |
|
| DL1:SVD | ||
IIS | INPUT selection | DL1:PC1 | COMPUTER1 | |
DL1:PC2 | COMPUTER2 | |||
|
| |||
|
| DL1:HD1 | HDMI1 | |
|
| DL1:HD2 | HDMI2 |
Note
zzThe control commands are available only when the DIGITAL LINK compatible projector is connected.
zzFor the control commands of the connected projector, refer to the Operating Instructions of the projector used.
46 - ENGLISH