Replacing Consumables

6

Push up on the paper feed roller block

and it will magnetically attach to the

 

chassis.

 

• When attaching the paper feed roller

 

block to the chassis, do not damage the

 

roller.

 

• You are now finished attaching the paper

 

feed roller module.

 

To continue, replace the retard roller

 

module according to the following

 

procedure. (The retard roller module is

 

located in the conveyor.)

7

Pull open the conveyor towards you by

using the indent on the right side.

• When the conveyor is pulled towards you, the click-stop mechanism will be released.

• When opening the conveyor, be careful not get your finger stuck in the indent.

8

Pull the right side of the shaft in the

direction of the arrow and hold it there.

 

(1)

 

Pull the retard roller module in the

 

direction of the arrow (2) and then

 

remove it.

Conveyor

2

Indent

1

Shaft

Retard roller module

43