Maintenance

Clearing a Jam

If a media jam occurs, the printer panel displays "Jam <#>". (#: indicates the jam portion)

To clear the media jam, refer to “Clearing a Jam” in the Maintenance and Specifications section.

NOTE:

•When a media jam occurs while you are using the multi- purpose tray, be sure to push the multi-purpose tray and close the tray cover before you pull the media tray out of the printer or open the front door.

Replacing Supplies

When the life of a component is worn out, the printer cannot print.

For detailed information, refer to the installation guide included in the supply’s carton to install it.

When the printer panel displays that a supply needs to be replaced, make sure that you have replacement supplies on hand.

•Toner Cartridge

•Waste Toner Cartridge

•Print Cartridge

•Fuser Unit

•Accumulator Unit

•Transfer Roller

Please contact the reseller from which the printer was purchased.

For detailed information, refer to “User Replaceable Components” in the Maintenance and Specifications section.

Adjusting Color Density

The printer panel provides an interface to adjust the density of the toner applied to the media.

This feature compensates for changes that can occur as environmental conditions change, replacement of accumulator unit and/or print cartridge.

To adjust the color density, refer to “Adjusting the Color Density (Color Calibration)” of Basics in the Settings and Printing section.

Setting “Adjust to Media”

This function is available in Windows only (not available in Macintosh).

If the print quality deteriorates when you print on other than recommended media, change the Adjust to Media settings. You can examine the print quality by printing out the test pattern.

To change the setting of Adjust to Media, refer to “Setting the “Adjust to Media” (Windows Only)” of Basics in the Settings and Printing section.

Cleaning the Printer

Periodic cleaning of the printer is recommended. The frequency of cleaning is dependent upon the environment in which the printer is used. You should clean the printer:

•At least once a month.

•When the printer experiences frequent media jams.

•When print quality has become deteriorated.

For detailed information, refer to “Cleaning the Printer” in the Maintenance and Specifications section.

Repacking

It is highly recommended that you keep the original carton and ALL packing materials.

Should you need to transport or ship your printer, please follow the instructions “Repacking” in the Maintenance and Specifications section.

Maintenance

21