Operating the answering device from a remote

phone (cont.)

During playback

Repeating a message

Press 1 to play the current message.

— If you press 1 within 5 seconds of playback, the previous message will be played.

Skipping a message

Press 2 to play back the next message.

Note:

Example of the voice guide:

Not enough recording time. Please erase

If you hear the voice guide after playing back the

messages, memory is full. Erase some or all of the

unnecessary messages.

messages.

 

Erasing incoming messages from memory

Erasing a specific message from memory

Press 4 when the message you want to erase is played.

A long beep and the voice guide will be played. Then the unit will continue with the next message.

Example of the voice guide:

The message has been erased.

Erasing all messages from a specific memory

You can erase all of the recorded messages from the common memory and each mailbox memory. To erase all of the messages in a mailbox, you must first select the mailbox.

Press 5 when you want to erase the messages in a specific memory.

— A long beep and the voice guide will be heard.

Example of the voice guide:

All messages have been erased.

Other remote operations

Monitoring the room sound

You can monitor the sound in the room where the unit is installed.

Press 6 during the remote operation.

— You can monitor the room sound for about 30 seconds.

Note:

After 30 seconds, a beep sounds. To continue monitoring, press 6 again within 10 seconds.

54