Routine care
Removing the handset cradle
To save space or to use the unit mainly for faxes, you may remove the handset cradle.
1 | Set the handset switch to “NO HANDSET” |
|
(see page 65). |
| |
2 | Pull the hooks to the right in the order as shown, | Hooks |
| ||
while lifting up the handset cradle. |
| |
3 | Disconnect and connect the power cord. |
|
|
| 2 |
Caution: | 1 | |
● If the handset and handset cradle have been removed |
| |
| when you connect the power cord, an alarm will |
|
| sound and the following message will be displayed. |
|
CHECK CRADLE
Set the handset switch to “NO HANDSET” (see page 65).
Cleaning the inside of the unit
If misfeeding occurs frequently or dirty patterns or black bands appear on a copied or transmitted document, clean the document feeder rollers, sub roller, rubber flap, white plate and glass.
1 | cord.Disconnect the power cord and the telephone line |
2 | Open the front cover by pressing the front cover |
open button. | |
3 | Clean the document feeder rollers and sub roller |
with a cloth moistened with isopropyl rubbing | |
| alcohol, and let dry thoroughly. |
4 | Clean the rubber flap with a cotton swab |
moistened with isopropyl rubbing alcohol, and let | |
| dry thoroughly. |
5 | Clean the white plate and glass with a soft dry |
cloth. | |
6 | Close the front cover by gently pressing down on |
both corners of the cover. | |
7 | Connect the power cord and the telephone line |
cord. |
Caution:
●Do not use paper products (such as paper towels or tissues) to clean the inside of the unit.
White plate |
|
Rubber flap |
|
| Document |
Sub roller | feeder rollers |
|
Glass
Front cover open button
Troubleshooting Care Routine and
75