Printing (PC)
52
Side seam
construction Peel-off strip Multiple flaps
Twist Curl Bent-edge
Wave Dog-ear Self adhesive
Clasp
Transparent window
Insert envelopes
as shown.
Adjust the
recording
paper
guides.
— High quality envelopes of
90
g
/m2(24 lb.) paper,
— Envelopes that have thin sharply creased leading
edges, and
— Envelopes that have diagonal seams as shown right.
●You can load up to 10 envelopes of 90
g
/m
2
(24 lb.)
paper
at a time for printing.
●Remove each envelope after printing.
●Wrinkles may occur in some cases, even if high quality
envelopes are used.
●Avoid printing in high humidity, above 70% relative
humidity (RH). High humidity may cause the envelope to
curl, pick up excess toner or seal the envelope.
●Avoid printing below 10
°
C (50
°
F) with less than 30% RH,
or it may cause light printing.
●Store envelopes away from moisture and humidity, where
they can lay flat and their edges will not be bent or
damaged. The humidity should not exceed 70% RH.
Do not use envelopes with any of the following
characteristics (using these may result in paper jams):
●Irregularly shaped envelopes
●Envelopes with curls, wrinkles, nicks, twists,
dog-ears or other damage
●Envelopes with side seam construction
●Highly textured envelopes, or with extremely
shiny surfaces
●Envelopes that seal by removing a peel-off strip
●Envelopes with more than one flap to be sealed
●Self-adhesive envelopes
●Envelopes that are baggy or not sharply creased
●Embossed envelopes
●Envelopes that have previously been printed on
●Envelopes that include cotton and/or fiber material
Do not attempt to print on any of the following types of
envelopes (these may cause damage to the fax machine):
●Envelopes with clasps, snaps or tie strings
●Envelopes with transparent windows
●Envelopes that use encapsulated types of adhesive that do
not require moistening but rely on pressure to seal them