Safety instructions
CAUTION:
Laser radiation
●The printer of this unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
AVOID DIRECT EXPOSURE TO BEAM.
Fuser unit
Caution:
Do not touch the bottom of this cover. It is very hot.
Fuser unit
●The fuser unit is inside of the unit and gets hot. Do not touch it when removing jammed paper or cleaning the lower glass.
Toner cartridge
●Be careful of the following when you handle the toner cartridge.
—Do not leave the toner cartridge out of the protection bag for a long time. It will decrease the toner life.
—If you ingest any toner, drink several glasses of water to dilute your stomach contents, and seek immediate medical treatment.
—If any toner comes into contact with your eyes, flush them thoroughly with water, and seek medical treatment.
—If any toner comes into contact with your skin, wash the area thoroughly with soap and water.
Drum unit
●Read the instructions on pages 13 and 14 before you begin installation of the drum unit. After you have read them, open the drum unit protection bag. The drum unit contains a photosensitive drum. Exposing it to light may damage the drum.
Once you have opened the protection bag:
—Do not expose the drum unit to light for more than 5 minutes.
—Do not touch or scratch the green drum surface.
—Do not place the drum unit near dust or dirt, or in a high humidity area.
—Do not expose the drum unit to direct sunlight.
Static electricity
●To prevent static electricity damage to the interface connectors (parallel and USB), the ADF jack or other electrical components inside the unit, touch a grounded metal surface, such as the metal part under the parallel interface connector before touching the components.
Metal part
For fax advantage assistance, call | 5 |