33
Sending Faxes

Sending the same document to pre-programmed parties

1Insert the document FACE DOWN.
If necessary, press u
repeatedly to select the desired setting
(p. 28).
2Press the desired a(1–2) or
HI.
You can also use n. Display the
desired key name, and press
i.
Example:
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling each
number sequentially.
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report
.
<BROADCAST1>
FACE DOWN
RESOLUTION
STOP
JOG DIAL
FAX START
SET
BROADCAST
MANUAL BROAD
Note:
If you select the “FINE”, “SUPER FINE” or “PHOTO”
resolution, the number of pages that the unit can
transmit will decrease.
If the document exceeds the memory capacity (p. 75),
sending will be canceled.
If one of the entries is busy or does not answer, it will
be skipped. All skipped entries will be redialed up to 2
times after all of the other entries have been called.
To cancel the broadcast setting
1. Press {while the unit displays the following.
Display:
The display will show the following.
/
2. Press w.
YES:SET/NO:STOP
SEND CANCELED?
BROADCASTING