Features Summary
54
How to set menu options
Programming table
Code
#22
Setting the journal report to print
automatically
AUTO JOURNAL
ON
OFF
To send a document:
1. Insert the document.
2. Follow steps 1–3 above.
3. Rotate
n
to select “ON”.
4. Press
w
.
5. Enter the fax number.
6. Press
w
.
7. Enter the transmission start time.
Press
*
to select “AM” or “PM”.
8. Press
w
.
9. Press
p
.
● To cancel after programming,
press {then w
.
“NEXT FAX”: This setting is
effective only for the next
attempted fax transmission. After
transmission, the unit will return to
the previous setting.
“ERROR”: When the previous fax
transmission fails and you redial
the same number.
● This feature is not available for
broadcast transmission.
● The calling charge may be higher.
#23
Sending document overseas
If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.
OVERSEAS MODE
Feature & Display Settings How the unit operates
#25
Sending a fax at a specific time
This feature allows you to take
advantage of low-cost calling
hours offered by your telephone
company.
● The setting can be reserved to
take place up to 24 hours in
advance.
DELAYED SEND
NEXT FAX
ERROR
OFF
ON /
fax no. /
hh:mm
OFF
(The default setting is in bold type.)
Advanced features!“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 29).
Note:
● Step 4 may be slightly different depending on the
feature.
● See page 51 for more details.
1. Press p.
2. Rotate nuntil the following is
displayed:
then press wand rotate n
until the desired feature is displayed.
3. Press w.
ADVANCED MODE
4. Rotate nuntil the desired setting
is displayed.
5. Press w.
6. Press p.