Setup
Connections
1
2
3
Connect the handset cord.
Connect the telephone line cord.
Connect the power cord.
●The unit will automatically start to detect the dialing mode of your telephone line (see below).
●When the power is turned on for the first time, the unit will print some basic information.
Power cord
120 V, 60 Hz
(protectorPower surge) |
|
|
| |
RJ11C |
|
| Handset cord | |
Line surge | ) | Telephone | ||
| ||||
( protector | line cord | Connect to “LINE”. |
Note:
●For additional equipment protection, we recommend the use of a surge protector. The following types are available; TELESPIKE BLOK MODEL TSB (TRIPPE MFG. CO.), SPIKE BLOK MODEL
The warranty does not cover damage due to power line surges or lightning.
●When you operate this product, the power outlet should be near the product and easily accessible.
●If you want to connect an answering machine to the unit, see page XX.
Automatic dialing mode setting
●When the telephone line cord and the power cord are connected, the unit will automatically start to detect the dialing mode of your telephone line.
Display: CHECKING LINE
Wait until one of the following messages is displayed.
LINE IS TONE Your line has touch tone service.
LINE IS PULSE Your line has rotary pulse dial service.
●If the power cord is disconnected or a power failure occurs, the unit will detect the dialing mode again when power is restored.
●If you connect the power cord before connecting the telephone line cord, the following messages will be shown alternately.
INSERT TEL LINE |
|
|
| NO TEL LINE |
|
|
| ||
|
|
|
|
|
Connect the telephone line cord.
24