Remote Operation

Changing to the TEL mode

You can change the setting of the receive mode from TAD/FAX to TEL from a remote location.

1.Call your unit.

2.Enter your remote operation ID.

3.Press 8 0 .

Turning the message transfer on or off

You must pre-program a transfer telephone number (p. 100) before using this feature.

Press 8 1 to turn ON the message transfer.

Press 8 2 to turn OFF the message transfer.

—If a transfer telephone number is not programmed, you cannot turn this feature ON. The voice guide will prompt you.

Voice guide example:

Message transfer is set.

Transfer phone number is 123456789.

Message transfer is off.

Transfer phone number is not set.

Turning the pager call on or off

You must pre-program a pager number (p. 80) before using this feature.

Device

Answering

Press 8 3 to turn ON the pager call.

Press 8 4 to turn OFF the pager call.

—If a pager number is not programmed, you cannot turn this feature ON. The voice guide will prompt you.

Voice guide example:

Pager call is set.

Pager number is 098765432.

Pager call is off.

Pager number is not set.

Skipping the greeting message

Press 0 during the greeting message playback.

— The unit will skip the rest of the greeting message.

97