Ink Film
4 Remove the stoppers and tags from the new ink film. Find the “T” shaped gear (blue).
Tags
Stopper
New ink film |
|
“T” shaped gear (blue) | Stopper |
|
5
6
Insert the blue core of the front ink film roll into the right slot of the unit ( 1 ). Insert the “T” shaped gear (blue) into the left slot of the unit ( 2 ).
Insert the back ink film roll ( 3 ).
If the ink film is slack, tighten it by winding the gear.
Incorrect Correct
ÒTÓ shaped gear (blue)
2 
Left slot
Front ink film roll
Back ink film roll Right slot
3
1
Blue core
Tight | 2 |
| Ink film |
Close the back cover securely by pushing |
|
7 down on the dotted area at both ends ( 1 ). |
|
Close the front cover securely ( 2 ). |
|
●The following message will be displayed
while the unit is checking that there is no slack on the ink film.
Gear
Dotted area
1
Display:
2
Note: | Front cover | Back cover | |
Display | |||
● The ink film is completely safe to touch, and will not | |||
|
rub off on your hands like carbon paper.
For fax advantage assistance, call | 101 |