Remote Operation
Operating from a remote location!
The following operations can be performed from a remote location using a touch tone telephone.
Program the remote operation ID (feature #11 on page 83) and set the unit to the TAD/FAX mode before going out (p. 68).
Dial key | Remote command | Page |
| Dial key | Remote command | Page | |
|
|
|
|
|
|
|
|
0 | Skips the greeting message | 79 |
|
| 4 | Erases a specific message | 79 |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
1 | Repeats a message | 78 |
|
|
|
|
|
|
| 5 | Erases all messages | 79 | |||
|
|
|
|
| |||
2 | Skips a message | 78 |
|
|
|
|
|
| 8 | 0 | Changes to the TEL mode | 79 | |||
|
|
|
| ||||
4 | New message playback | 78 |
| ||||
|
|
|
|
| |||
| 8 | 1 | Turns ON message transfer | 79 | |||
|
|
|
| ||||
5 | All messages playback | 78 |
| ||||
|
|
|
|
| |||
|
|
|
| 8 | 2 | Turns OFF message transfer | 79 |
6 | Room monitor | 79 |
| ||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
7 | 79 |
| 8 | 3 | Turns ON pager call | 79 | |
|
|
|
|
|
|
|
|
9 | Stops | 79 |
| 8 | 4 | Turns OFF pager call | 79 |
| message |
|
|
|
|
|
|
Remote operation card
Please cut out and carry this card for assistance when using the remote operation.
Answering Device |
| Notice of Remote Operation |
Remote Operation |
|
|
|
| |
|
|
|
1.Call your unit.
2.Enter the remote operation ID
during the greeting message.
●The new messages will be played automatically.
●If there are no new messages, wait for 4 seconds. All the messages will be played back.
3.Press the remote command key(s) within 10 seconds (see the reverse side).
here Fold
●The remote operation is available only from a touch tone telephone when the unit is in the TAD/FAX mode.
●When the unit is in the TEL mode, call your unit and wait for 15 rings. The answering device will temporarily answer the line. Enter the remote operation ID during the greeting message. The unit will switch to the TAD/FAX mode.
●When you press a key, press firmly.
●To send a document, press
9 . When a fax tone is heard, start transmission.
77