Feature/Code Selection
Setting the TAM to email
destinations (LAN connection
only)
RThis feature can be
programmed only through
the web browser interface.
Select email destinations where you want to send incoming voice messages
automatically (up to 6 destinations).
Important:
RProgram the email server settings (page 97), and the email
destinations (page 98) beforehand.
1. Start Multi-Function Station.
2. [Utilities] A [Configuration Web Page] A [Device Configuration]
3. Type “root” as the user name, then enter the password (feature #155 on
page 79). A [OK]
4. Select the [TAM FEATURE] tab.
5. Click [Edit] next to [DESTINATION].
6. Click [Address Book] next to the desired destination.
7. Click the desired name you want to send the incoming voice messages to.
8. [Submit]
9. Close the web browser.
Note:
RTo check the status of the last 15 transfers, click [List] next to [RESULT] in
step 5.
*1 When this setting is changed using the base unit, the setting for the cordless handset (KX-MB2060 optional) will
also be changed, and vice versa.
89
11. Programmable Features