6. Fax (KX-MB3020 only)
42
activated (page 59). For an explanation of error
messages, see page 76.
6.1.2 Using the automatic document feeder
1If the {Fax} light is OFF, turn it ON by pressing
{Fax}.
2Set the original (page 18).
3If necessary, change the resolution and contrast
according to the type of document.
LTo select the resolution, see page 41.
LTo select the contrast, see page 41.
4{Monitor}
5Dial the fax number. i {Start}
Note:
LTo stop sending, see page 73.
LDo not open the document cover when sending a fax
with the automatic document feeder.
Pre-dialing a fax number
1. Enter the fax number.
2. Set the original (page 18). i {Start}
Sending from memory (Quick scan feature)
1. Set the original (page 18).
2. Enter the fax number. i {Quick Scan}
6.2 Storing items for the one-touch dial feature and navigator directory
The unit provides the one-touch dial feature (10 items)
and navigator directory (300 items).
LStation 1 to 3 can be used alternatively as broadcast
keys (page 44).
LMake sure that the {Fax} light is ON.
6.2.1 Storing one-touch dial item
1Press {Menu} repeatedly to display “DIRECTORY
SET���.
2Select the desired station key.
For station 1–3:
1. Press the desired station key.
2. Press {V} or {^} repeatedly to select “DIAL
MODE”. i {Set}
For station 4–5:
Press the desired station key.
For station 6–10:
Press {Lower}, then press the desired station key.
3Enter the name, up to 16 characters (see page 72 for
character entry). i {Set}
4Enter the telephone number, up to 32 digits. i
{Set}
LTo program other items, repeat steps 2 to 4.
5{Stop}
Note:
LA hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Storing navigator directory items
1Press {Menu} repeatedly to display “DIRECTORY
SET”. i {>}
2Enter the name, up to 16 characters (see page 72 for
character entry). i {Set}
{Quick Scan}
{Monitor}
{Start}
{Fax}
{Lower}
Station keys{Fax}
{Directory}
{Stop}
{Set}{Menu}
{V}{^}{>}