“
11
Preparation
Battery Charge
Place the handset on the base unit
and charge for about 6 hours
before initial use.
≥The IN USE/CHARGE indicator lights.
IN USE/CHARGE Indicator
OR
Battery strength
You can check the battery strength on the display while the handset is on
the base unit, while it is in use (making/answering a call etc.), or after
viewing the Caller List or directory items, programming etc.
The battery strength will remain for 5 seconds after using the handset,
then the display will return to the standby mode (see next page).
The battery strength is as shown in the chart below.
Display prompt Battery strength
Fully charged
Medium
Low
(flashing) Needs to be recharged.
Installing the Battery in the Handset
Install the battery and close the handset cover, locking it into place.