Panasonic KX-TCD735ALM Setting the Unit to Answer Calls, Press to set the answering system on

(Answer ON) Button and Indicator

Answering System Operations with the Base Unit

See the corresponding pages for function details.

<Standby mode on the base unit>

4 messages

0 New Calls

12.05 13:58

<Answering System Buttons on the base unit>

Press the following button for the operation you desire.

<Button>

To set the answering system ON/OFF (p. 86)

To erase recorded message (p. 89)

To record a memo message (p. 87)

To playback/record a greeting message (p. 87)

To stop playing/recording message (p. 88)

To playback recorded messages (p. 88)

To repeat message (p. 88)

To skip message (p. 88)

When the unit answers a call, a greeting message is played and the caller’s message is recorded.

•The total recording time (including the greeting message and audible caller ring) is about 16 minutes.

Setting the Unit to Answer Calls

Press to set the answering system ON.

•“Answer set” is heard.

•Answer ON indicator ( ) on the base unit lights.

•[A] is displayed on the handset display in the standby mode.

•If the new message is recorded, the Answer ON

indicator ( ) starts flashing.

•The unit will announce the remaining recording time if it is less than 5 minutes.

•If you hear “Memory is full” and the indicator flashes rapidly, erase some or all of the messages (p. 89)

•If you do not want the unit to answer calls, press

again to set the answering system OFF. The Answer ON indicator ( ) light goes out and “Answer off” is heard.

•You can also turn on the answering system remotely using any other phone (p. 93).

86