Making Calls
28
To dial after confirming the
entered number
1. Enter a phone number.
•If you misdial, press the soft key
( ). Enter the correct phone
number.
•If a pause is required when dialing,
press the soft key ( ) where
needed (p. 50).
•To cancel, press [OFF].
2. Press [C]or [s].
3. To hang up, press [OFF] or place
the handset on the base unit.
To adjust the receiver/
speaker volume during a
conversation
There are 3 volume levels for the
receiver and 6 volume levels for the
speaker.
To increase volume, press [B].
To decrease volume, press [d].
•The display shows the current volume
setting.
•If you try to increase/decrease volume
when it is at the maximum/minimum
level, the handset will beep 3 times.
To redial the last number
dialed
Press [C]or [s], then press
[REDIAL].
To redial using the redial
list (Memory Redial)
The last 5 phone numbers dialed are
stored in the redial list.
1. Press [REDIAL].
•
The last number dialed is displayed.
2. Scroll to the desired number by
pressing [d]or [B].
•You can also scroll down through
the list by pressing [REDIAL].
•To exit the list, press [OFF].
3. Press [C]or [s].
•To erase an item, scroll to the item
then press the soft key ( ).
•If “No items stored” is displayed,
the list is empty.
To put a call on hold
1. Press [HOLD/INTERCOM]
during a conversation.
•“Press extension# to
transfer” is displayed.
•To transfer the call to the base unit,
see page47; to transfer to a
mailbox, see page 64.
2. Press
[HOLD/INTERCOM]
again.
•“Hold” is displayed.
To return to the call, press [C]or
[s].
•The base unit user can also take the
call by pressing [SP-PHONE].
•If another phone is connected on the
same line (p.11), you can also take
the call by lifting its handset.
•If a call is kept on hold for 6 minutes,
an alarm tone will start to sound and
the Ringer/Message Alert indicator will
start to flash rapidly. After 4 additional
minutes on hold, the call will be
disconnected.
3334444|
CLEAR
PAUSE
Volume
Low Highd
B
Ex. Receiver volume: High
Speaker volume: Level 6
ERASE