Useful InformationAnswering System
Preparation
35
Using the Caller List
For assistance, please call: 1-800-211-PANA(7262)
Telephone System

Viewing the Caller List

•If there is no name information for a caller, the display will only show the phone
number.
•If you do not press any buttons for 60 seconds, the unit will exit the Caller List.
What “” means
“” indicates you have already viewed this calling
information or answered the call. If the same caller calls
again, the call entry with the “” will be replaced with the
new call entry.
If a caller calls more than once
The number of times the same caller called is displayed
(“u2” to “u9”). The date and time of the most recent call
will be recorded. After viewing a caller’s information, “u2”
to “u9” will be replaced with “”.

Calling Back from the Caller List

•In some cases, you may have to edit the number before dialing (p. 36).
(Ex. You may have to delete “1” and the area code.)
•If a phone number is not displayed in the caller information, you cannot call that
caller back from the Caller List.
1Press the soft key ( ), [d], or [B] to
enter the Caller List.

2

To search from the most recent call, press
[d]
.
To search from the oldest call, press [B].
•The caller’s name, number and the time and date
of the call are displayed.
3Press[OFF] to exit the list.
1Press the soft key ( ), [d], or [B] to enter the Caller List.
2Scroll to the desired caller by pressing [d]or [B].
3Press [C]or [s].
•The phone number is dialed.
Handset
CID Ex.
10 calls
missed.
Caller list
10 missed calls
d
B
=Scroll list
SMITH,JACK
1-555-333-4444
3:10P JUN.10
Example
SMITH,JACK
1-555-333-4444
3:10P JUN.10
TURNER,CINDY
1-555-456-7890
11:20A JAN.12 u3
Ex. Called 3 times.
Handset
CID