Panasonic PT-D7700E, PT-DW7000E

102

Specifications

PT-D7700E PT-DW7000E

Power supply 220 V–240 V~, 50 Hz/60 Hz

Power consumption 800 W (about 15 W in standby without fan running)

DLPTM panel

Panel size

Display system

Number of pixels

0.95 inch (aspect ratio 4:3)

Three-unit DMDTM element, DLPTM type

3 x 1 470 000 pixels (1 400 x 1 050 dots)

Lens

Powered zoom

Powered focus control

Option

Projection lamp 2 bulbs x 300 W UHM lamp

Optical output 7 000 lm

Applicable scanning frequency

For video signal (S-video included)

For RGB signal

For DVI-D signal

For YPBPRsignal

Horizontally 15.73 kHz/15.63 kHz, vertically 59.94 Hz/50 Hz

Horizontally 15 kHz–100 kHz, vertically 24 Hz–120 Hz,

Panasonic Intelligent Auto Scanning (PIAS) system

Dot clock frequency 20 MHz–162 MHz

[480i], horizontally 15.73 kHz, vertically 59.94 Hz

[480p], horizontally 31.5 kHz, vertically 59.94 Hz

[576i], horizontally 15.63 kHz, vertically 50 Hz

[576p], horizontally 31.25 kHz, vertically 50 Hz

[720/60p], horizontally 45 kHz, vertically 60 Hz

[1 035/60i], horizontally 33.75 kHz, vertically 60 Hz

[1 080/60i], horizontally 33.75 kHz, vertically 60 Hz

[1 080/50i], horizontally 28.13 kHz, vertically 50 Hz

[1 080/24p], horizontally 27 kHz, vertically 24 Hz

[1 080/30p], horizontally 33.75 kHz, vertically 30 Hz

[1 080/25p], horizontally 28.13 kHz, vertically 25 Hz

[1 080/24sF], horizontally 27 kHz, vertically 48 Hz

• HD/SYNC, VD terminals are not compliant with 3 value composite

SYNC.

Colour system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)

Screen size 70 inch–600 inch

Screen aspect ratio 4:3

Projection scheme Menu-selectable from front/rear/ceiling mount, and floor standing

Contrast ratio 4 000:1 (when “DYNAMIC IRIS” has been set to “3”)

Interface ports

Input module connection slot

RGB1 input terminal

One system of input module connection slot

1 set, BNC x 5

[For YPBPRinput]

Y: 1.0 V[p-p] synchronization signal included,

PBPR: 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω

HD/SYNC: 75 Ω, 1.4–5 Vp-p, positive/negative polarity automatically adjusted

VD: 75 Ω, 1.4–5 Vp-p, positive/negative polarity automatically adjusted

[For RGB input] 0.7 V[p-p] 75 Ω

Model No.

1.Interlace signals are not supported even when the EDID2 mode is selected.

6 000 lm

16:9

0.85 inch (aspect ratio 16:9)

Three-unit DMDTM element, DLPTM type

3 x 1 049 088 pixels (1 366 x 768 dots)

EDID1 480p, 576p, 720/60p,

720/59.94p, 720/50p

1 080/60i, 1 080/59.94i,

1 080/50i, 1 080/24sF,

1 080/23.98sF

1 080/30p, 1 080/29.97p,

1 080/25p, 1 080/24p,

1 080/23.98p

EDID2 1Displayable resolution :

VGA-UXGA

(non-interlace)

Dot clock frequency :

25 MHz-162 MHz