14
S-VIDEO IN terminal (pages 22 and 23)
An input terminal for S-video signals
(MIN4-pin DIN).
This terminal complies with S1 signals and
automatically toggles between 16:9 and 4:3
according to the size of input signals.
VIDEO IN terminal (page 23)
An input terminal for video signals. (BNC)
VIDEO OUT terminal (page 23)
An output terminal (active through) for video
signals. (BNC)
RGB (YPBPR) 1 input terminal (pages 24, 25)
A terminal to input RGB or YPBPRsignals (BNC).
RGB (YPBPR) 2 input terminal (page 24)
A terminal to input RGB or YPBPRsignals (D-SUB
15-pin female).
REMOTE1 lN/OUT terminal (page 17)
When two or more main units are used in the
system, they can be connected and controlled with
a wired remote control cable (M3 jack).
REMOTE2 terminal (page 76)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
SERIAL IN terminal (pages 23–25, 67, 74, 75)
This terminal is an RS-232C/RS-422 compliant
input terminal (switching necessary) to connect a
PC and to externally control the main unit
(D-SUB 9-pin female).
SERIAL OUT terminal (pages 24, 25, 67, 74, 75)
This terminal is an RS-232C/RS-422 compliant
output terminal (switching necessary) to supply
signals given to the serial input terminal
(D-SUB 9-pin male).
SERIAL
S-VIDEO RGB 2 IN
VIDEO
REMOTE 1
RGB 1 IN
IN
IN IN
OUT
OUT OUT
SYNC/HD VDB/PBG/Y
REMOTE 2
R/PR
RS-232C (G) / RS-422 (R)RS-232C (G) / RS-422 (R)
IN
Side-mounted
connection terminals
Name and function of parts