Panasonic PT-D7700E, PT-DW7000E

ENGLISH

PICTURE

PICTURE MODE DYNAMIC

COLOR 50

TINT 30

COLOR TEMP. DEFAULT

GAMMA 2.2

CONTRAST 32

BRIGHT 32

SHARPNESS 6

NOISE REDUCTION 2

DYNAMIC IRIS 1

:MENU SELECT

:CHANGE

Press the “MENU” button.

The MAIN MENU screen will be displayed

Select “PICTURE” with the

buttons.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

LANGUAGE

OPTION

TEST PATTERN

SIGNAL LIST

SECURITY

Press the “ENTER” button.

The PICTURE screen will be displayed.

Select “COLOR TEMP.” with the

buttons.

Select the desired setting from below

with the buttons.

“LOW”, “MIDDLE”, “HIGH”, “DEFAULT”, “USER1”

and “USER2”

WHITE BALANCE

WHITE BALANCE HIGH

WHITE BALANCE LOW

Select “USER1” or “USER2” in Step .

Press the “ENTER” button.

Select “WHITE BALANCE HIGH” or

“WHITE BALANCE LOW” with the

buttons.

• All colours will not be displayed properly unless adequate adjustment is made.

If the adjustment is not successful, press “STD” (standard) button when the individual adjustment

screen is displayed to restore the factory default setting only for the displayed item.

• The colour temperature cannot be adjusted for the internal test pattern (refer to page 77). Be sure to

project the input signal when adjusting the colour temperature.

• When any setting other than “OFF” has been selected for colour matching, the COLOUR TEMP.

setting is fixed at “USER1”

• “DEFAULT” cannot be selected when the picture mode has been set to “USER”

Note

Press “ENTER” button.

The WHITE BALANCE HIGH (LOW) screen will be

displayed.

Select “R”, “G” or “B” with the

buttons.

Adjust the level with the buttons.

R (Red) Deepens red.

Weakens red.

Deepens green.

Weakens green.

Deepens blue.

Weakens blue.

G (Green)

B (Blue)

Maximum value 255

Minimum value 0

WHITE BALANCE HIGH

R 255

G 255

B 255

Press button

Item Adjustment RemarksOperation

Adjusting the colour temperature

Adjustment procedure (to be performed while projecting the signals to be adjusted)

Press button