3
Product Outline
This is a high-luminance DLPTM based projector which is powered by a single-phase, 3-wire type 200 V – 240 V
power supply. It utilizes three RGB DMDTM chips and a high-output xenon lamp. By fitting a projection lens and
input module (sold separately) in accordance with the setting-up location and the type of input signal, it can project
images onto screens from 100 inches (2.5 m) to 600 inches (15 m) in size.
By installing an input module (sold separately), the unit can handle various types of RGB signals, chrominance
signals for high-vision TMDS (Transition Minimized Differential Signalling)-type digital interface, and also NTSC,
NTSC4.43, PAL, SECAM, PAL-M, PAL60, PAL-N video signals, Y/C signals and serial digital (SDI) signals.etc.
Besides this, the projector is equipped with an RS-232C / RS-422 connector so that it can be controlled by means
of a personal computer or signal selector.
Other functions available include selection of the projection method (ceiling/floor/rear), an ID number assignment
function which is useful for controlling multiple projectors simultaneously, keystone(trapezoidal distortion)correction
and a lens focus/position adjustment (optical axis shift) function. All settings and adjustments during the setting-up
process can be carried out easily by using on-screen menus.
In addition, a self-diagnosis display function is also provided. This function generates and displays a two-digit error
code to notify you if a problem occurs with operation of the projector.
DMDTM chip’s aspect ratio is 4:3 on the PT-D9510U or 5:4 on the PT-D9610U.
Features
A contrast of 1 000 : 1 (Contrast mode; When super), which match that of e-cinema is realized using a new 1 600
W xenon lamp and luminous control technology.
The unit can be controlled from a PC using a LAN interface. This equipment has a function for automatically sending
e-mail when the equipment is abnormal, so a system for remote control or central control can be easily realized.
The projector utilizes a DLPTM (Digital Light Processing) system which incorporates an 0.9-inch(for the PT-D9510U)/1.1-
inch (for the PT-D9610U) DMDTM (Digital Micromirror Device) having a display resolution of 1 024 x 768 dots(for the
PT-D9510U)/1 280 x 1 024 dots(for the PT-D9610U) that produces a three-layer image from R, G and B layers.
This system produces images with high resolution and color reproduction which is faithful to the source. Because it can
handle dot clock frequencies ranging from 20 MHz to 162 MHz, computer images with signal resolutions of up to 1 600
x 1 200 dots can also be input. However, if the display resolution is greater than 1024 x 768 dots(for the
PT-D9510U)/1 280 x 1 024 dots (for the PT-D9610U), A-PIC (Advanced Panasonic Intelligent Compression)
automatically converts the image to a resolution of 1024 x 768 dots(for the PT-D9510U)/1 280 x 1 024 dots(for the PT-
D9610U)without causing any lines or characters to disappear, and without causing any flickering.
DMDTM is an optical switch, a new device having a high utilization-factor of light and a high reaction rate, incorp-
rating approximately from 780 000 to 1 310 000 micromirrors which rotate according to a digital signal in the solid-
state memories.
Contrast of 1000:1 realized
High-density, high-quality computer images can also be projected
Contents
45. Sold separately (Optional accessories)• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 92
46. Dimensions• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 93
47. NOTES IMPORTANTES CONCERNANT LA SÉCURITÉ • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 94
48. Précautions concernant la sécurité• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 95
49. Précautions à suivre lors de la manipulation • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 97
50. Nettoyage du filtre à air • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 98
51. Remplacement du module-lampe• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 99
Network functions are standard equipment