Panasonic PT-D9510U, PT-D9610U

Registering input signal data

Because the projector has no factory pre-set data of input signals, be sure to register input signal data before

first use.

• Up to 64 different input signals can be registered.

• Input a signal according to an input module installed on the projector and register the signal data.

Registration new signal

• If a new signal is input and MENU key of the remote control unit or projector operating panel buttons are pressed,

the new signal registration screen shown below will be displayed.

The registration procedure is given below.

Registration procedure

Press the MENU button. ... The NEW SIGNAL INPUT screen will be displayed.

Press the ENTER button. ... The SIGNAL STATUS screen will be displayed.

• Parameters such as the memory number, signal selector input number, slot input

number, type of input signal, frequency, and synchronizing signal are identified

and displayed automatically.

• The memory numbers are from A1 to H8.(Each from A to H has eight memory

numbers each.)

The lowest number of available memory numbers is displayed automatically.

If there is no available memory number, follow the overwriting procedure on the

next page.

• For the registration name (NAME), the signal name and memory number are

displayed automatically.

When using the original name displayed automatically on the screen without

change, press the ENTER button.

• The registration is complete and the display will return to the MENU screen.

When changing the original name, press LEFT( ) and RIGHT ( ) arrow buttons

to select a letter or number and then press the UP ( ) and DOWN ( ) arrow

buttons to enter the selected letter or number. (To delete automatically displayed

names, press the STD (standard) button.)

After changing the name, press the ENTER button.

• The registration of the new name is complete and the display will return to the

MENU screen.

• If the MENU button is pressed instead of the ENTER button, the original

name will be registered instead of the new name.

NOTE

(Displayed contents is an

example)

NOTE