Panasonic PT-D9510U, PT-D9610U

Adjusting the picture size

Adjustment procedure

Press the MENU button. ... The MENU screen will be displayed.

Press the UP ( ) and DOWN ( ) arrow buttons to select POSITION.

Press the ENTER button. ... The POSITION screen will be displayed.

Press the UP ( ) and DOWN ( ) arrow buttons to select SIZE.

Press the ENTER button. ... The SIZE screen will be displayed.

Press the control level buttons ( +and −) to select the desired size mode from

those indicated below.

DEFAULT, THROUGH, H-FIT, V-FIT, HV-FIT, ZOOM

•“4:3”, “16:9” ----- Modes other than the analog RGB or TMDS input allow the

selection.

Size modes

DEFAULT • • •The input signal is projected with the aspect ratio unchanged.

THROUGH •The input signal is projected with the resolution unchanged.

H-Fit • • • • • • • • • • •The input signal is projected with all horizontal panel picture elements used.

For signals with a aspect ratio which is vertically longer than 4:3(for the PT-D9510U)/

5:4(for the PT-D9610U), the top and bottom edges of the picture are cropped.

V-Fit • • • • • • • • • •The input signal is projected with all vertical panel picture elements used.

For signals with a aspect ratio which is horizontally longer than 4:3(for the PT-D9510U)/

5:4(for the PT-D9610U), the left and right edges of the picture are cropped.

HV-Fit • • • • • • • •The input signal is converted to an aspect ratio of 4:3(for the PT-D9510U) / 5:4(for the

PT-D9610U).

For signals with an aspect ratio other than 4:3(for the PT-D9510U) / 5:4(for the PT-D9610U),

circles in the picture become distorted, etc.

For signals with an aspect ratio other than 5:4 circles in the picture become distorted, etc.

ZOOM • • • • • • • •The enlargement ratio of the picture is changed. The enlargement ratio in both the horizontal

and vertical directions can be changed to between 50 % and 999 %(except analog RGB, TMDS

input), between 75 % and 999 %( up to SXGA of analog RGB, TMDS input),between 100 % and

999 %(UXGA of analog RGB, TMDS input) with the top-left corner of the screen as

the reference point.

4:3 • • • • • • • • • • • •The input signal is projected with the aspect ratio 4:3.

16:9 • • • • • • • • • • •The input signal is projected with the aspect ratio 16:9.

• An overscan of 7 % is applied to all modes other than analog RGB input and TMDS input.

• The 4:3 and 16:9 mode are only for YUV type signal input