Settings

[PCadjust]menumenu

Select [PC adjust] from the main menu on the menu screen, and select the item from the sub menu.

For operation of the menu screen, refer to “Navigating through menu” ( page 50). zzAfter selecting the item, press ▲▼◀▶ to make

the setting.

Remote control

Control panel

[Auto PC adj.]

Automatically adjusts synchronization, total number of dots, horizontal shift, and vertical shift.

1)Press ▲▼ to select [Auto PC adj.].

2)Press the <ENTER> button.

zzThis executes automatic adjustment.

Note

zzYou can also use [Auto PC adj.] by pressing the <AUTO PC ADJ.> button on the remote control. zzSome computers will be unable to adjust any of

[Fine sync], [Total dots], [Position H], or [Position V]. In this case, adjust manually and register in [Store]. zzAfter registering the automatically adjusted settings,

you can select that mode using [System] in the [Input] menu.

zzThe automatic PC adjustment function does not work when any of [480p], [576p], [720p], [480i], [576i], [1035i], [1080i], or [1080p] have been selected using [System] in the [Input] menu.

zzWith some computers and types of signal, it may not be possible to project the images correctly.

[Fine sync]

Adjusts the projector when there is flicker due to a tracking (synchronization) mismatch.

1)Press ▲▼ to select [Fine sync].

2)Press the <ENTER> button.

zzThe adjustment screen is displayed.

3) While looking at the screen, press ◀▶ to adjust the setting.

zzPress the <ENTER> button to return to the sub menu.

Note

zzThe adjustment value can be set from 0 to 31. zzFor some computers, it may not be possible to

completely eliminate the screen flicker.

[Total dots]

Adjusts total number of dots in the horizontal interval.

1)Press ▲▼ to select [Total dots].

2)Press the <ENTER> button.

zzThe adjustment screen is displayed.

3) While looking at the screen, press ◀▶ to adjust the setting.

zzPress the <ENTER> button to return to the sub menu.

[Position H]

Adjusts the horizontal position of the screen.

1)Press ▲▼ to select [Position H].

2)Press the <ENTER> button.

zzThe adjustment screen is displayed.

3) While looking at the screen, press ◀▶ to adjust the setting.

zzPress the <ENTER> button to return to the sub menu.

56 - ENGLISH