Chapter
ff Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple computers.
ff Change the password first. (x page 121)
ff The administrator rights allow use of all functions. The user rights allow use of only the following functions: [Projector status] (x page 112), viewing of the error information page (x page 113), [Network status] (x page 114), [Access error] (x page 114), [Mail error] (x page 114), [Basic control] (x page 115), [Advanced control] (x page 115), [Change password] (x page 121)
ff Access will be locked for few minutes when an incorrect password is entered three times consecutively.
ff Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled properly if it is set with a browser that does not have this function enabled.
ff If the screen for the web control is not displayed, consult your network administrator.
ff While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
ff The subsequent web control screens show examples for PT‑EZ580. Screen content may differ from that for the model you are using.
Descriptions of items1Page tab
Pages are switched by clicking this item.
2[Status]
The status of the projector is displayed by clicking this item.
3[Projector control]
The [Projector control] page is displayed by clicking this item.
[Projector status] page4[Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5[Change password]
The [Change password] page is displayed by clicking this item.
6[Crestron Connected(TM)]
The control page of Crestron ConnectedTM is displayed by clicking this item.
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1[PROJECTOR TYPE]
Displays the type of the projector.
2[MAIN VERSION]
Displays the firmware version of the projector.
3[POWER]
Displays the status of the power.
4[SHUTTER] *1
Displays the status of the shutter (ON: closed, OFF: open).
5[PICTURE MODE]
Displays the setting status of [PICTURE MODE].
6[SERIAL NUMBER]
Displays the serial number of the projector.
*1 For
Displays the status of AV mute function.
7[NETWORK VERSION]
Displays the version of the firmware of the network.
8[REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
9[LAMP POWER]
Displays the setting status of [LAMP POWER] (x page 87).
10[VOLUME]
Display the volume status.
11[INPUT SELECT]
Displays the status of the selected input.
12[INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
112 - ENGLISH