Features of the ProjectorHigh luminance and high contrast

▶▶A high luminance*1 and a high contrast*2 (Except for PT-EW540,PT-EX510) are

achieved by means of a unique optical system and lamp drive system.

*1 6 200 lm for PT‑EX610, 5 800 lm for PT‑EW640, 5 400 lm for PT‑EZ580, 5 300 lm for PT‑EX510 and 5 000 lm for the PT‑EW540.

*2 5 000:1 for PT‑EZ580, PT‑EW640 and PT‑EX610,

2 000:1 for PT‑EW540 and PT‑EX510.

Easy and highly flexible setup

▶▶Easy and highly flexible setup is achieved by an electric lens shift function, and a lineup of various optional lenses.

Reduced maintenance costs

▶▶Maintenance costs are reduced by use of an extended-life filter and a recommended lamp replacement interval of 4 500 H*1.

*1 When [LAMP POWER] is set to [ECO]

This time is only the target for replacement and not the warranty time.

Quick Steps

For details, refer to the corresponding pages.

1.Set up the projector. (x page 30)
2.Attach the Projection Lens. (x page 38)
3.Connect with external devices. (x page 39)
4.Connect the power cord. (x page 44)
5.Switch on the projector. (x page 45)
6.Make initial settings.
(x page 46)

ff Take this step when you switch on the power for the first time after purchasing the projector.

Energy conservation achieved through the ECO function

▶▶Lamp power is optimized according to the input image.*1 Power consumption is also reduced by optimizing the lamp power according to the brightness of the setup installation location, state of the input signals and state of the video mute.*2

*1 When [LAMP POWER] is set to [AUTO]

*2 When [ECO MANAGEMENT] is set to [ON]

7.Select the input signal. (x page 49)
8.Adjust the image. (x page 49)

ENGLISH - 13